available
€80.00 Tax included
error
Shipped according to supplier's deadline
-
Livraison en points relais : Gratuit
Une question ?
+33 2 97 11 80 95
Detailed features
Ronstan's RF58 turret with wire and wedge
It will allow blocking and releasing the rope from all angles. Used to control manoeuvres. The rope grab has a stainless steel bushing for minimum friction and wear. The wedge has thick aluminium plates, which will guarantee a minimum of deformation under load.
Ronstan RF58 turret detailed specifications
- Spinner and wedge
- Clamp: T series fiberglass (medium)
- Aluminium arms
- 360° rotation
- Stringing: 3 to 12 mm
- Weight: 160 g
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Clamcleat CL223W/R Loop Cleat</h2>
<div class="fiche-txt">This cleat opens on the side and acts as a fixed and adjustable point. Ropes with a maximum diameter of 6 mm.</div>
<h2>Features of the Clamcleat CL223W/R cleat</h2>
</div>
available
-
<div class="fiche-txt">
<h2>CL253/R trapeze cleat for trapeze system</h2>
<div class="fiche-txt">This cleat has been designed to adjust the height of the trapeze loop in dinghies or sport catamarans. Designed for ropes from 4 to 8 mm in diameter, it also exists in two finishes: Aluminium or anodised aluminium.</div>
<h2>Features of the Clamcleat CL253/R for trapeze system</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Clamcleat CL244/R boom cleat and clamps</h2>
<div class="fiche-txt">It is fixed on a post or a tube. Its alloy allows it to be very resistant. Its nylon clamp is maintained by two screws. Several diameters are available.</div>
<h2>Clamcleat CL244/R Features</h2>
</div>
available
-
<p><span>Essential accessory to install the cleats on the deck. Available with 2 possible centre distances 27mm or 38mm corresponding to MICRO or STANDARD cleats. <br /></span></p>
available
• 
