available
Detailed features
WICHARD triple pulleys for 8-9 mm rope
These pulleys are suitable for heavy loads and static manoeuvres. The 45 sheave rotates around the stainless steel shaft and is protected by the flanges. The universal head of these pulleys allows a wide choice of attachments. Available with or without balls. Without balls, they are perfect for mainsail hoists, halyards, boom vang, spinnaker sheets for sport catamarans and small keelboats. With balls, they have two rows of lateral balls, which gives them a very good performance under light load. Under high load, the forces are taken up by the stainless steel shaft without lateral friction. You can use them for mainsheet and sheet track, spinnaker sheets and arms, genoa sheets and backstays.
Characteristics of the WICHARD triple pulleys for 8-9 mm rope
- EM: Manila Swan
- EMR: Emerillon Manille Ringot
- EMRT : Swivel shackle Ringot cleat
| Designation | EM | EMR | EMRT |
| Height | 84 mm | 101 mm | 101 mm |
| Width | 37 mm | 37 mm | 66 mm |
| Thickness | 58 mm | 58 mm | 60 mm |
| C.T | 560 kg | 560 kg | 200 kg |
| C.R | 1,000 kg | 1,000 kg | 1,000 kg |
| Weight | 0,149 kg | 0,157 kg | 0.208 kg |
In the same category
4 other products seleted for you-
<p style="text-align:justify;">This block is one of Harken's smallest blocks. It is ideal for small synthetic fiber tuning lines on Hi-Tech dinghies. It features a patented bearing system that uses stainless steel balls captured in a groove</p>
available
-
<p>This bullet pulley has a low coefficient of friction for guiding bumps to the rear. It is compact and lightweight, with fast engagement and release under high or light loads.</p>
available
-
<div class="fiche-txt">
<h2>Ronstan's range of 40mm Single Orbit Winch Pulleys</h2>
<div class="fiche-txt">No metal elements in these Orbit pulleys, except for the stainless steel ball bearings, everything is made of high-tech polymer resin capable of withstanding heavy loads. The special feature of the Orbit pulleys is also the optimization of the ball track, which frees up the central part of the pulley hub and thus reduces the weight. The Orbit Simple Series 40 is a range of blocks in several versions used for mainsheet and spinnaker sheets on dinghies, catamarans and sport keelboats up to 5 meters, but also for halyard, tackle and backstay reefing on boats up to 8 meters. They can also be used for trimming lines on boats over 8 meters. Very light, with a working load of 325 kilos and a breaking strength of 700 kilios, and a compact weight.</div>
<div class="fiche-txt"></div>
<h2>Ronstan Orbit 40mm Single Pulley Features</h2>
</div>
available
-
<p><span>This Harken pulley has a low coefficient of friction and is compact and lightweight. It is therefore ideal for windsurfers and dinghies or for low load trimming bumps.</span></p>
available
• 
