available
Triple pulleys for 10 mm rope | Picksea
  • Triple pulleys for 10 mm rope | Picksea
  • Triple pulleys for 10 mm rope | Picksea
  • Triple pulleys for 10 mm rope | Picksea

Triple pulleys for 10 mm rope

See detailed specifications

€69.00 Tax included

check_circle In stock
Une question ? +33 2 97 11 80 95

Une question ? +33 2 97 11 80 95

Detailed features

WICHARD 10 mm rope triple pulleys

These blocks are available with or without balls. Without balls, you can use them for mainsheet hoists, halyards, boom vang, spinnaker pole vang and mast step. With balls, you can use it for mainsheet and mainsheet tracks, spinnaker sheets and arms, genoa sheets and runners. With its excellent resistance to heavy loads, it will allow you a large choice of fasteners thanks to its universal head.

Characteristics of the WICHARD 10 mm triple pulleys

Designation EM: Manila swivel EMR : Ringot manila swivel

EMRT : Swivel shackle ringot cleat

Height 97 mm 117 mm 117 mm
Width 49 mm 49 mm 87 mm
Thickness 67 mm 67 mm 72 mm
C.T 560 kg 560 kg 360 kg
C.R 1,000 kg 1,000 kg 1,000 kg
Weight 0.243 kg 0,257 kg 0,357 kg

In the same category

4 other products seleted for you
  • <div class="fiche-txt"> <h2>Ronstan 30mm Single Orbit Pulley with Lashing Head</h2> <div class="fiche-txt">No metal parts in these Orbit pulleys, except for the stainless steel ball bearings, everything is made of high-tech polymer resin capable of withstanding heavy loads. The special feature of the Orbit blocks is also the optimization of the ball track, which frees up the central part of the block hub, thus limiting the weight and allowing the passage of lashing or dyneema link. The 30 Orbit series is used on mainsail and spinnaker sheets for dinghies, catamarans and sport keelboats up to 5 meters. Very light and with a working load of 300 kilos for a break of 600 kilios for a weight of 22 grams, it is one of the most performing blocks in its category.</div> <div class="fiche-txt"></div> <h2>Features of the Orbit 30mm Lashing Head Ronstan RF35101 single pulley</h2> </div>
    available
  • <div class="fiche-txt"> <h2>Ronstan 20mm Single Orbit Pulley with Lashing</h2> <div class="fiche-txt">No metal elements in these Orbit pulleys, everything is made of high tech polymer resin capable of supporting high loads. The special feature of the Orbit blocks is also the optimization of the ball track which frees up the central part of the block hub, thus limiting the weight and allowing the lashing to pass through the dyneema garcette. The 20 Orbit series can only be used on dinghy and catamaran trimmers up to 5 meters. Very light and able to support a working load of 250 kilos for a break of 550 kilios for a weight of 9 grams, it is one of the most performing blocks in its category.</div> <div class="fiche-txt"></div> <h2>Features of the Ronstan RF25109 Orbit 20mm Single Pulley with Lashing</h2> </div>
    available
  • <div class="fiche-txt"> <h2>Wichard's friction ring</h2> <div class="fiche-txt">This ring combines performance, lightness and reliability. It is very resistant and can be used under heavy loads or with low traffic. It allows a good circulation of the ropes while limiting the wear of the latter.</div> <div class="fiche-txt"></div> <h2>Detailed characteristics of the Wichard FRX friction ring</h2> </div>
    available
  • <p>Like the other models in the same range, this pulley is ideal for small synthetic fibre ropes. It has a patented bearing system that uses stainless steel balls.</p> <p>The 467 pulley is equipped with a narrow sheave for extremely fine adjustment bumps.</p>
    available