available
Detailed features
Plastimo's through-rope fenders
These fenders are made of high quality flexible PVC and are UV treated. They are delivered "ready to use" inflated and with the through rope mounted.
Characteristics of Plastimo's through-rope fenders
| Dimensions | 10 x 30 cm | 15 x 43 cm | 20 x 55 cm | 25 x 68 cm | 30 x 80 cm |
| Color | White | White | White | White | White |
| Max. boat length | 6 m | 8 m | 10 m | 12 m | 14 m |
You might also like 3 other products seleted for you
-
<h2>Mooring protection</h2>
<p>Plastimo's Spiroll Mooring Protection is a clever sleeve that wraps around the friction areas of your mooring lines to protect them from premature wear and tear and also to reduce noise in the mooring cleats. Easy to install and remove thanks to its roll-up system.</p>
<h2>Detailed characteristics of the mooring line holder</h2>
available
-
<div>
<h2>Plastimo's Performance inflatable fenders</h2>
<div><span>Inflatable fender from the Performance range, made of shiny, UV-resistant soft PVC. </span></div>
<div><span>Can be used horizontally or vertically.</span><br /><span>Thanks to the design of the ends, the PVC flows perfectly from one end of the mould to the other during the baking process.</span><br /><span>The material is thus distributed very evenly over the entire fender: whatever the point of impact on the fender, the shock absorption is optimal.</span></div>
<div><span>Delivered uninflated, with rope: Remember to bring the Plastimo valve connector for easy and quick inflation.</span></div>
<div><span>You can check the pressure of the fender at any time with a pressure gauge or by measuring the circumference of the fender.</span></div>
<div></div>
<h2>The characteristics of Plastimo's Performance fenders:</h2>
</div>
available
-
<h2>Fitting for Plastimo valve :</h2>
<p>The valve fitting will allow you to inflate bumpers or fenders from the Plastimo Performance range and is compatible with all Plastimo inflators. Its diameter is 14 mm.</p>
<p>You can check the ideal pressure at any time using a pressure gauge or by measuring the circumference.</p>
<h2>Characteristics of the Plastimo valve fitting :</h2>
available
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Euromarine bow fenders</h2>
<div class="fiche-txt">These fenders are rotomoulded in one piece. They have a non-return valve with 3 anchor points. The fenders have a 3-point check valve and 3 anchor points, with 3 fixing holes for a secure hold, perfect for protecting the bow of your boat.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of Euromarine's bow fenders</h2>
</div>
available
-
<h2>Characteristics of the Plastimo Pontoon Fender Fixing Kit</h2>
<p>Set of 4 stainless steel fixings to fix the Bumper - Pontoon Fender in the aluminium profile of the pontoon.</p>
available
-
<h2>Fitting for Plastimo valve :</h2>
<p>The valve fitting will allow you to inflate bumpers or fenders from the Plastimo Performance range and is compatible with all Plastimo inflators. Its diameter is 14 mm.</p>
<p>You can check the ideal pressure at any time using a pressure gauge or by measuring the circumference.</p>
<h2>Characteristics of the Plastimo valve fitting :</h2>
available
-
<h2>Fender to protect the bow of your boat</h2>
<p>The bow fender is made of one-piece rotomolded white PVC and is UV resistant. It features a durable brass check valve and 3 mounting holes for a secure fit. Perfect for protecting the bow of your boat.</p>
<h2>Characteristics of the bow fender</h2>
available
• 
