available
Detailed features
International No. 3 Thinner
This thinner is used only for autifouling coatings and to facilitate the application of single component varnishes and finishes by spray.
The characteristics of the International No. 3 thinner
- Packaging: 0.5 L or 1 L
In the same category
4 other products seleted for you-
available
-
<div class="fiche-txt">
<h2>Matt Chem's SELECT HT Dielectric Degreasing Solvent</h2>
<div class="fiche-txt">It has been specially designed and formulated for electronic and electrical equipment. It will allow you to dissolve oils, greases and all carbon deposits on the contacts. It evaporates relatively quickly and leaves no residue. It will not attack plastic materials.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of Matt Chem's SELECT HT dielectric degreasing solvent</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Matting Additive Polyurethane: International's Two-Component Matting Agent</h2>
<div class="fiche-txt">This transparent two-component matting solution can be mixed with International's two-component finishes or varnishes to produce a beautiful matte finish. It can be used inside and outside (deck and cabin), by brush or roller. Matte finish, with good depth and durability of the paint. Volume 750 ml.</div>
<div class="fiche-txt"> </div>
<h2>The characteristics of the Matting Additive : the matting agent for mono-component of International</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International Thinner #7</h2>
<div class="fiche-txt">This thinner is used for Interprotect and Gelshied 200 for 1 L.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of International Thinner No. 7</h2>
</div>
unavailable
• 
