available
Detailed features
Plastimo's Performance inflatable fenders
Inflatable fender from the Performance range, made of shiny, UV-resistant soft PVC.
Can be used horizontally or vertically.
Thanks to the design of the ends, the PVC flows perfectly from one end of the mould to the other during the baking process.
The material is thus distributed very evenly over the entire fender: whatever the point of impact on the fender, the shock absorption is optimal.
Thanks to the design of the ends, the PVC flows perfectly from one end of the mould to the other during the baking process.
The material is thus distributed very evenly over the entire fender: whatever the point of impact on the fender, the shock absorption is optimal.
Delivered uninflated, with rope: Remember to bring the Plastimo valve connector for easy and quick inflation.
You can check the pressure of the fender at any time with a pressure gauge or by measuring the circumference of the fender.
The characteristics of Plastimo's Performance fenders:
| Dimensions in cm | ||
| Diameter | Length | Ring diameter |
| 10 | 40 | 1,3 |
| 13 | 50 | 1,6 |
| 15 | 60 | 2 |
| 20 | 80 | 2,7 |
Recommended pressure: Standard fender 0.15 to 0.20 bar
You might also like 1 other product seleted for you
-
<h2>Fitting for Plastimo valve :</h2>
<p>The valve fitting will allow you to inflate bumpers or fenders from the Plastimo Performance range and is compatible with all Plastimo inflators. Its diameter is 14 mm.</p>
<p>You can check the ideal pressure at any time using a pressure gauge or by measuring the circumference.</p>
<h2>Characteristics of the Plastimo valve fitting :</h2>
available
In the same category
4 other products seleted for you-
<h2>Bow protection</h2>
<p>These protections made of white PVC prevent damage to the bow when mooring or docking in a cat-way.</p>
<h2>Detailed characteristics of the bow protector</h2>
available
-
<h1 class="product--view--title">Bumper for pontoons</h1>
<div class="product--view--caption entry mCustomScrollbar _mCS_1">
<div id="mCSB_1" class="mCustomScrollBox mCS-light mCSB_vertical mCSB_inside">
<div id="mCSB_1_container" class="mCSB_container" dir="ltr">
<div class="pvc-description entry">
<p>Genuine patented bumper to be fixed on the pontoon. Depending on its location, this bumper will protect the bow or the side of your boat so that it does not get damaged against the pontoon. Can be used on any type of pontoon and purlin thanks to its system <span>without drilling (</span>the head of the bolt locks into the groove) and can also be adapted to all pontoons with an adjustment range of 40 to 120 mm from the edge of the pontoon.</p>
<h2>Characteristics of the Bumper for pontoons</h2>
</div>
</div>
</div>
</div>
available
-
<div class="fiche-txt">
<h2>Euromarine bow fenders</h2>
<div class="fiche-txt">These fenders are rotomoulded in one piece. They have a non-return valve with 3 anchor points. The fenders have a 3-point check valve and 3 anchor points, with 3 fixing holes for a secure hold, perfect for protecting the bow of your boat.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of Euromarine's bow fenders</h2>
</div>
available
-
<h2>Fender to protect the bow of your boat</h2>
<p>The bow fender is made of one-piece rotomolded white PVC and is UV resistant. It features a durable brass check valve and 3 mounting holes for a secure fit. Perfect for protecting the bow of your boat.</p>
<h2>Characteristics of the bow fender</h2>
available
• 
