available
Detailed features
This Harken pulley has a low coefficient of friction and is compact and lightweight. It is therefore ideal for windsurfers and dinghies or for low load trimming bumps.
- Sheave diameter: 22 mm
- Maximum rope diameter: 6 mm
- Diameter: 5 mm
- Length: 57 mm
- Weight : 21 g
- Maximum working load: 91 kg
- Breaking load: 544 kg
In the same category
4 other products seleted for you-
<div class="fich-txt">
<h2>The WICHARD single pulley for 8-9 mm rope</h2>
<div class="fich-txt">This pulley is available in different versions with or without balls. Its universal head will allow a wide choice of fixations. It has an excellent resistance to heavy loads. The sheave is protected by the flanges. With balls, you can use it for mainsheet and track, spinnaker sheets and arms, genoa sheets and backstays. Without balls, you can use it for mainsheet hoists, halyards, boom vang and spinnaker sheets for sport catamarans and small keelboats. The fittings are in 316L stainless steel, the flanges in polycarbonate and the sheave in composite.</div>
<div class="fich-txt"></div>
<h2>The characteristics of the WICHARD single pulley for 8-9 mm rope</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Ronstan 30mm Single Orbit Pulley with Lashing Head</h2>
<div class="fiche-txt">No metal parts in these Orbit pulleys, except for the stainless steel ball bearings, everything is made of high-tech polymer resin capable of withstanding heavy loads. The special feature of the Orbit blocks is also the optimization of the ball track, which frees up the central part of the block hub, thus limiting the weight and allowing the passage of lashing or dyneema link. The 30 Orbit series is used on mainsail and spinnaker sheets for dinghies, catamarans and sport keelboats up to 5 meters. Very light and with a working load of 300 kilos for a break of 600 kilios for a weight of 22 grams, it is one of the most performing blocks in its category.</div>
<div class="fiche-txt"></div>
<h2>Features of the Orbit 30mm Lashing Head Ronstan RF35101 single pulley</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Ronstan's range of 40mm Single Orbit Winch Pulleys</h2>
<div class="fiche-txt">No metal elements in these Orbit pulleys, except for the stainless steel ball bearings, everything is made of high-tech polymer resin capable of withstanding heavy loads. The special feature of the Orbit pulleys is also the optimization of the ball track, which frees up the central part of the pulley hub and thus reduces the weight. The Orbit Simple Series 40 is a range of blocks in several versions used for mainsheet and spinnaker sheets on dinghies, catamarans and sport keelboats up to 5 meters, but also for halyard, tackle and backstay reefing on boats up to 8 meters. They can also be used for trimming lines on boats over 8 meters. Very light, with a working load of 325 kilos and a breaking strength of 700 kilios, and a compact weight.</div>
<div class="fiche-txt"></div>
<h2>Ronstan Orbit 40mm Single Pulley Features</h2>
</div>
available
-
available
• 
