available
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>A survival knife to put in your vest in case of emergency</h2>
<p>This knife, practical to carry with you, will allow you to quickly cut the ropes in an emergency situation. The belt cover is included with the knife for easy attachment to the life jacket.</p>
<h2>Features of the Crewsaver ErgoFit survival knife</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Switch your Deckvest Spinlock Lifejacket to Manual mode!</h2>
<p>For water sports such as Jet Ski, Wake or Kayak, an automatic vest is not suitable because it would be triggered too easily when in contact with water. For this use, Spinlock recommends the use of this kit to switch your Deckvest UML or Deckvest Lite vest to Manual mode. Installed in a few minutes, this cap allows you to deactivate your UML firing pin so that you can dive into the water without the risk of triggering the inflation of your vest.</p>
<h2>Spinlock Deckware series, boat safety is not a luxury</h2>
<p>The English brand develops and produces safety accessories for the professional and amateur sailor with reference products such as the deckvest 5D, the rolls of the offshore lifejacket, integrating the harness, a flash light, an eye cutter, a retractable anti-spray hood. Essential for the equipment of professional sailors, it is also the choice of demanding boaters in terms of safety at sea.</p>
</div>
available
-
<h2>UML Pro Sensor 150N Automatic Vest Refill Kit</h2>
<p>Refill kit consisting of a 33 gram 150N adult CO2 cartridge and the UML trigger. This standard kit is perfectly adapted for the Skipper Automatic 150N waistcoat but also for any other automatic waistcoat using the UML 150N firing pin with a 33 gram CO2 cartridge.</p>
available
-
<p>Refill kit consisting of a 33 gr 150N adult CO2 cartridge and the Hammar trigger. This standard kit is perfectly suited for the Hammar 150N FORMULA waistcoat.</p>
available
• 
