available
Detailed features
A grapple with tapered shovels
This grapple with tapered shovels is made of hot-dip galvanized steel.
Characteristics of the Plastimo grapple
- 8 different grapple weights
- Hot-dip galvanized steel
In the same category
4 other products seleted for you-
<h2>30 meter hand-held probe line</h2>
<p>Made of 4 mm diameter nylon braid with coloured coils every metre, and a colour change every 10 metres.</p>
<h2>Features of the handheld probe</h2>
available
-
<div class="fiche-txt">
<h2>Euromarine's rod mooring buoys Diameter 39 cm : </h2>
<div class="fiche-txt">Inflatable mooring buoy for dead bodies, in flexible rotomolded PVC, with short galvanized steel rod. The rod is positioned in the middle and the buoy is equipped with a unique brass valve, for easy inflation or deflation. The flexible PVC is anti-UV treated to guarantee its durability over time. It is possible to inflate it with a bicycle or car pump, with an appropriate adapter. Maximum expected pressure is 0.2 bar / 2.9 psi</div>
<h2>The characteristics of the rod mooring buoys</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Jumbo regatta buoy PLASTIMO</h2>
<p>The Jumbo regatta buoy, designed for large boats, is easy to spot even on very long courses thanks to its height of 3.20 m. The buoy is made of 1100 decitex PVC, which makes it perfectly resistant to handling and possible collisions during regattas. The three reinforced fixing points, located under its base, allow it to be weighted according to the weather conditions.</p>
<h2>Detailed characteristics of the PL40266 PLASTIMObuoy</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Euromarine's rod mooring buoys Diameter 54cm : </h2>
<div class="fiche-txt">Inflatable mooring buoy for dead bodies, in flexible rotomolded PVC, with short galvanized steel rod. The rod is positioned in the middle and the buoy is equipped with a unique brass valve, for easy inflation or deflation. The flexible PVC is anti-UV treated to guarantee its durability over time. It is possible to inflate it with a bicycle or car pump, with an appropriate adapter. Maximum expected pressure is 0.15 bar</div>
<h2>The characteristics of rod mooring buoy : </h2>
</div>
available
• 
