Detailed features
Switch your Deckvest Spinlock vest to Manual mode!
For water sports enthusiasts such as Jet Ski, Wake or Kayak, an automatic vest is not suitable because it would be triggered too easily when in contact with water. For this use, Spinlock recommends the use of this kit to switch your Deckvest Pro Sensor Elite vest to manual mode. Installed in a few minutes, this cap allows you to deactivate your UML firing pin so that you can dive into the water without risking the inflation of your vest.
Spinlock, boat safety is not a luxury
The English brand develops and produces safety accessories for the professional and amateur sailor with reference products such as the Deckvest 5D, the rolls of the offshore lifejacket, integrating the harness, a flash light, an eye cutter and a retractable anti-spray hood. Essential for the equipment of professional sailors, it is also the choice of demanding boaters in terms of safety at sea.
- Automatic - Manual Conversion Kit
- For Spinlock Deckvest Pro Sensor Elite vests
- Comes with installation instructions.
- the kit contains a UML firing pin deactivation plug and a manual trigger
- Caution: By converting your Deckvest to Manual you are taking the responsibility to clearly indicate its status and to warn the users of this vest.
In the same category
4 other products seleted for you-
<h2>Single lanyards with 2 stainless steel carabiners with double safety and automatic closing</h2>
<p>Very flexible polyester lanyard with retroreflective thread for easy and quick night-time identification. Lanyard in webbing 23 mm wide and 1m long.</p>
<h2>Characteristics of the single lanyard with 2 carabiners</h2>
available
-
<div class="fiche-txt">
<h2>Reload your UML automatic firing pin vest with this reset kit</h2>
<p>These recharging kits, which include a CO2 refill and a black cellulose capsule, will allow you to refill your UML automatic firing lifejacket.</p>
<h2>Which kit to choose according to your Crewsaver vest ?</h2>
<ul><li>23g for Crewfit Junior 150N vests</li>
<li>33g for Crewfit 165N Sport Vests</li>
<li>38g for 180N and 190N vests</li>
<li>60g for 290N vests</li>
</ul><h2>Features of the UML Crewsaver automatic reset kit</h2>
</div>
available
-
<div class="fiche-txt">
<h2>A reset kit for Hammar MA1 trigger vests</h2>
<p>Refill your Hammar MA1 hydrostatic release vest with this refill kit.</p>
<p>Compatible with the Crewsaver Ergofit 190N and 290N vests.</p>
<ul><li>Ergofit 190N vest: 38g capsule</li>
<li>Ergofit 290N Vest: 60g capsule</li>
</ul><h2>Features of the Hammar MA1 Crewsaver hydrostatic reset kit</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>CO2 Refill for Restube Basic, Classic and Sport</h2>
<p>In this refill kit, 2 CO2 refill cartridges compatible for the RESTUBE Basic, Classic and Sport.</p>
<h2>Features of the CO2 Refill for Restube Security System</h2>
</div>
unavailable
• 
