available
€178.00 Tax included
error
Shipped according to supplier's deadline
Une question ?
+33 2 97 11 80 95
You might also like 2 other products seleted for you
-
available
-
available
In the same category
4 other products seleted for you-
available
-
available
-
<div class="fiche-txt">
<h2>The Kitecleat is a smart accessory to make your life easier when kite-surfing!</h2>
<p>With the Kitecleat from KiteSurfVoilier you will no longer need to untwist your lines before launching your kiteboard! No more wasting precious minutes trying to untangle your kite lines, this essential accessory allows you to leave them perfectly straight at each release, to find them perfectly aligned at the next launch! By wedging the 4 lines in its jaws and rolling up the rest, you can be sure that at the next session the unrolled lines will be perfectly clear and ready for take off. This gives a particularly interesting advantage when you want to take off from the stern of a sailboat: Connect your lines, let your kite drift away by unrolling the lines, and hop, immediate takeoff!<br />You can also easily check the length balance of your lines. Kitecleat Abs has been designed for simplicity and ease of use above all! Also, very light and compact, the Kitecleat is resistant to applied forces and the environment.</p>
<h2>Features of the Kitecleat</h2>
</div>
unavailable
-
<h2>A receiver allowing to fix the majority of the accessories of the Railblaza brand</h2>
<p>Fast and versatile, the MiniPort TracMount is designed to fit most existing kayak rails, including YakAttack, Wilderness Systems, Native Watercraft and Yak Gear, with no tools required.<br /><br />Works without tools, easy to install and adjust by simply turning the MiniPort which screws directly into the track using our TracNut. Repositioning in the track is simple, just turn to release the tension.<br />Please note: <br />Designed to be used in light applications. If using for trolling with RodHolder, it should be used on the right (starboard) side, so that the MiniPort tightens up when the load starts to leave. If you use the left (port) side, the MiniPort will loosen up when the load hits the rod)</p>
<h2>Detailed characteristics of the Miniport receiver from Railblaza</h2>
unavailable
• 
