Boat maintenance
After a few months of winter storage, a check-up of your boat is necessary! It is important to take regular care of your boat so that it doesn't get damaged and can last for many years. Find the Picksea selection to take care of your hull, engine and sails. For sails, you will find Dacron and other repair kits, spinnaker tape, cleaner, sail glue, grey tape but also splicing kits and a hinge. For the hull and the rest of the boat, the choice is very wide! Epoxy plaster, foam sealant, putty, lubricant and WD40, antifouling polish, gelcoat, plaster diluents, various cleaners, varnish, degreaser, antifouling, wood treatment and oil, grease, rust remover gel... You are spoilt for choice to have a boat at the top!
Read more
There are 124 products.
-
<h2 style="text-align:justify;">One Drop McLube</h2>
<p>OneDrop can be used on all ball and roller bearings. It repels salt, dirt and other deposits to clean, protect and lubricate. It greatly reduces friction and therefore improves the efficiency of pulleys, trolleys... Just put a drop on one of the balls or rollers and it's done!</p>
<p>Carriage and End-of-Arm: The OneDrop maintains smooth, precise movement of carriages and protects them from corrosion. The OneDrop does not cause dust and dirt to accumulate and does not gum up the ball bearings.</p>
<p>Mainsail Luff Car: The OneDrop makes hoisting and lowering sails easier and faster in all conditions. The OneDrop does not cause dust or dirt to accumulate on the traveler balls and makes reefing easier under load. - •</p>
<p>Pulleys: One Drop protects pulleys from corrosion and lubricates them, giving them exceptional ease of use and accuracy. - •</p>
<p>Jib Furler: The OneDrop lubricates and protects the furling mechanism, increasing its life and making it easier to operate without clogging.</p>
available
-
<h2>Mooring protection</h2>
<p>Plastimo's Spiroll Mooring Protection is a clever sleeve that wraps around the friction areas of your mooring lines to protect them from premature wear and tear and also to reduce noise in the mooring cleats. Easy to install and remove thanks to its roll-up system.</p>
<h2>Detailed characteristics of the mooring line holder</h2>
available
-
<div class="fiche-txt">
<h2>An essential part of your toolbox for boat repairs</h2>
<p>This fabric tape, also called Grey Tape or Duct Tape, is a classic for boat repairs. Its ultra resistant and reinforced structure allows you to carry out repairs or temporary or permanent protections. It will be one of your most faithful friends with the WD40 degreaser.</p>
<h2>Find our selection of accessories for the comfort of the sailor</h2>
<p>Picksea selects the best sailing accessories for the experienced sailor and the casual sailor. All the accessories for your favourite water sport are in our Boat Equipment and Sailing Accessories category.</p>
</div>
available
-
<div class="fiche-txt">
<h2>An ecological polish with lemon for a better glide</h2>
<div class="fiche-txt">This McLube polish is recommended by Harken. Made from lemon, it is totally environmentally friendly. It provides a deep clean and protects the hull while significantly improving the glide of your boat. A polish that lasts and gives a shiny appearance to your hull and protects it against UV.</div>
<div class="fiche-txt"></div>
<h2>Mc Lube products recommended by Harken for a perfect glide</h2>
<p>Harken recommends the McLube brand for its high performance cleaning and maintenance products. Whether it's greasing blocks and cleats (One Drop), sliding sails in the mast or boom (Sailkote) or polishing your hull (Speed Polish and Hullkote) McLube products will significantly improve the performance of your boat.</p>
</div>
available
-
<div class="fiche-txt">
<h2>Add colour to your GelCoat with EUROMARINE</h2>
<div class="fiche-txt">EUROMARINE offers you colouring pastes of different colours that you can put in your GelCoat to give it the colour you want.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of EUROMARINEcolouring paste</h2>
</div>
available
-
<div class="fiche-txt">
<h2>VC General Thinner from International</h2>
<div class="fiche-txt">This thinner has been specially formulated for use with the International VC range of products.</div>
<div class="fiche-txt"></div>
<h2>Features of the VC General Thinner from International</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International's anti-slip powder</h2>
<div class="fiche-txt">This powder is synthetic and can be added to finishes prior to application or sprinkled on a wet film for a non-slip coating. It does not affect the drying time and does not change the way the finish is applied.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of International's anti-slip powder</h2>
</div>
available
-
<div class="fiche-txt">
<h2>McLube lubricant for the maintenance of your boat:</h2>
<p>The McLube brand lubricant is very easy to use, this fast drying spray quickly sets on all clean and dry surfaces. It helps to repel dirt and reduce drag in the air and water. McLube Sailkote spray is far more effective than other Telfon, oil or wax based products.</p>
<h2>A McLube environmental spray</h2>
<p>The range of spary sailkote is ecological, indeed, these products do not contain any chlorofluorocarbon, nor petroleum derivative or other toxin. This product is very popular in the boating industry for the maintenance of your boat.</p>
</div>
available
-
<div class="fiche-txt">
<h2>A 100 % polish of McLube!</h2>
<p>This revolutionary fittings product is a lemon-based polish. McLube offers a 4 in 1 product: it cleans, polishes, protects and shines your boat hull. The quick and easy application will give your boat a new look in seconds. It also prevents mud from settling below the waterline.</p>
<h2>Picksea offers a wide selection of deck hardware products:</h2>
<p>Picksea, the number 1 in boating equipment, offers a selection of hardware products: boat maintenance, blocks, cleats, ropes and much more. Don't hesitate to contact our customer service by email or phone to get advice from our experts.</p>
</div>
<h2>Detailed characteristics of the polish</h2>
available
-
<div class="fiche-txt">
<h2>Kilbact water tank disinfectant</h2>
<p>KILBACTE is a <strong>disinfectant</strong> for your boat's water tanks. Pour about 25cl per 100 litres of water to decontaminate the water and eliminate all traces of bacteria and microbial fermentation. This one litre bottle is intended for the maintenance of your <strong>fresh water tank</strong> for a period of 1 to 2 years depending on the frequency of use of your boat. This product called "Food" disinfects the bags, tanks and jerry cans of water while keeping your drinking water without Chlorine and silver nitrate. Guaranteed harmless to the skin, eyes and mucous membranes.</p>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Dry Fast White Gelcoat for your boat</h2>
<div class="fiche-txt">A repair to do, it's not a problem anymore! This white gelcoat will allow you to repair all these impacts and scratches. Your boat will find its most beautiful aspect! It is available in 250g.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of this gelcoat Dry Fast Sea Line</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Long lasting antifouling (2 seasons) by International</h2>
<div class="fiche-txt">Its polishing rate will allow you to avoid the accumulation of layers. You can use it on all types of materials, even aluminium. This antifouling is recommended for propellers and waterline. The protection of this antifouling will be effective up to 18 months.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
<div class="fiche-txt"></div>
<h2>Detailed characteristics of Trilux 33 International Antifouling</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International Thinner No. 9</h2>
<div class="fiche-txt">This thinner is used with two-component varnishes and lacquers.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of International #9 thinner</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International Thinner #7</h2>
<div class="fiche-txt">This thinner is used for Interprotect and Gelshied 200 for 1 L.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of International Thinner No. 7</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International No. 3 Thinner</h2>
<div class="fiche-txt">This thinner is used only for autifouling coatings and to facilitate the application of single component varnishes and finishes by spray.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of the International No. 3 thinner</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Micron Extra EU long lasting erodible antifouling</h2>
<div class="fiche-txt">This antifouling will provide you with up to 24 months of protection. With Biolux technology, it has a reinforced anti-fouling efficiency. Its maximum time before being put in the water is 12 months.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt">
<div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
</div>
<div class="fiche-txt"></div>
<h2>Characteristics of Micron Extra EU antifouling</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International Cruiser Bright White Antifouling</h2>
<div class="fiche-txt">This antifouling is versatile white, it will allow you a seasonal protection. It has the advantage of being compatible with all types of supports.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt">
<div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
</div>
<div class="fiche-txt"></div>
<h2>Detailed characteristics of the antifouling International Cruiser Bright White</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The economical erodible antifouling that can be applied in one coat: Cruiser UNO EU</h2>
<div class="fiche-txt">This economical antifouling allows you to do your refit in record time thanks to its high covering power and ease of application. It is suitable for motorboats going up to 25 knots and for sailing boats. It will be effective for one season in areas with average soiling. The application and the launching are very fast: 24 hours. Its environmental impact is reduced thanks to its low VOC content.</div>
<div class="fiche-txt"><br /><div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
<div class="fiche-txt"></div>
</div>
<h2>Features of International Cruiser UNO EU Erodible Antifouling</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Ultra EU Hard Matrix Antifouling that can be sanded for a perfect glide</h2>
<div class="fiche-txt">Ultra powerful, it will be perfect for areas with heavy soiling. Its finishes are durable and long lasting, they can even be sanded. In order to reinforce its anti-smudge effectiveness, Ultra EU antifouling has the Biolux technology.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt">
<div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
</div>
<div class="fiche-txt"></div>
<h2>Detailed characteristics of International Ultra EU Hard Matrix Antifouling</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International No. 1 Thinner</h2>
<div class="fiche-txt">This thinner is used for single-component paints and varnishes.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of International's No. 1 thinner</h2>
</div>
available
-
<div class="fiche-txt">
<h2>International Degreaser Oplosser</h2>
<div class="fiche-txt">This solvent thinner is a professional cleaning product designed to remove surface contaminants such as waxes, oils and sanding residues.</div>
<div class="fiche-txt"></div>
<h2>Features of the International Degreaser Oplosser</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The epiglass Boatyard base of International</h2>
<div class="fiche-txt">This product serves as a base.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of the epiglass Boatyard base of International</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Matrix Dure antifouling for sailors and motorboats</h2>
<div class="fiche-txt">Ideal for use in fresh and salt water. Effective, its finish is smooth and smooth, it can be sanded for a better glide. The VC OFFSHORE EU antifouling is perfect for fast racing boats.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt">
<div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
</div>
<div class="fiche-txt"></div>
<h2>Features of International OFFSHORE EU PVC Antifouling</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Economical Seasonal Antifouling by International</h2>
<div class="fiche-txt">This antifouling will guarantee you a seasonal anti-fouling protection from 4 to 6 months. Ideal for areas with light to medium soiling. It will be perfect as an economical solution for short term maintenance.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt">
<div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
</div>
<div class="fiche-txt"></div>
<h2>Characteristics of Boatguard EU International Economical Antifouling</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Trilux Prop-O-Drev aerosol antifouling</h2>
<div class="fiche-txt">This aerosol will make it easy to apply the antifouling on the tormented areas. It will be perfect for propellers, bases, outboard motors, and is compatible with aluminum and stainless steel.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt">
<div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
</div>
<div class="fiche-txt"></div>
<h2>Characteristics of Trilux Prop-O-Drev aerosol antifouling</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Uni Pro EU Antifouling from International</h2>
<div class="fiche-txt">This antifouling has been specially designed for sailboats and motorboats up to 25 knots and will provide all season protection. Ideal for medium to heavy soiling areas. With a low VOC content, it reduces the level of emissions and thus reduces its environmental impact.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt">
<div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
</div>
<div class="fiche-txt"></div>
<h2>Features of International Uni Pro EU Antifouling</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Boatyard epiglass hardener from International</h2>
<div class="fiche-txt">This product is used as a hardener. It is available in Standard or Rapid.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of Boatyard epiglass hardener from International</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The International HT55 pump</h2>
<div class="fiche-txt">This pump is suitable for Epiglass HT9000 epoxy resin. The HT55 pump is calibrated to deliver the perfect mixing ratio of base and hardener in a single stroke.</div>
<div class="fiche-txt"></div>
<h2>Features of the International HT55 pump</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The International HT80 pump</h2>
<div class="fiche-txt">This pump is suitable for the Boatyard pack. It allows an excellent mixing ratio between the base and the hardener.</div>
<div class="fiche-txt"></div>
<h2>Features of the International HT80 pump</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The International Gelshield 200</h2>
<div class="fiche-txt">This is a protective epoxy primer that will protect your polyester against osmosis. It has the advantage of being very fast drying and easy to apply. You can apply several coats in one day. It requires 5 coats to protect against osmosis.</div>
<div class="fiche-txt"></div>
<h2>Features of the International Gelshield 200</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The Gelshield Plus Kit from International</h2>
<div class="fiche-txt">This epoxy primer is a non solvent based osmosis treatment. It is compatible with different substrates: fully cured polyester and epoxy coatings. Please note that this Gelshield Plus Kit should not be applied directly to the gelcoat.</div>
<div class="fiche-txt"></div>
<h2>Features of the Gelshield Plus Kit from International</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International Clear Wood Sealer Fast Dry two-component primer</h2>
<div class="fiche-txt">This two-component polyurethane primer is colourless and has the advantage of being quick drying. Thus you can apply up to 4 coats in one day. It can be used indoors and outdoors. It will provide you with a scratch resistant, shock resistant and weatherproof film. Attention the BASE (A) and the Hardener are sold independently in 5 liter cans. It is necessary to mix the 2 to obtain the applicable bi-component primer.</div>
<div class="fiche-txt"></div>
<h2>Features of International Clear Wood Sealer Fast Dry two-component primer</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International's Epoxy GP Coating Primer</h2>
<div class="fiche-txt">This primer is applicable on pre-treated steel, aluminium and plywood. Its overcoating time is extended when overcoated with a bi-component.</div>
<div class="fiche-txt"></div>
<h2>Features of International Epoxy GP Coating</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International Primocon Primary</h2>
<div class="fiche-txt">This conventional primer is single component and is ideal for use in submerged areas. It dries very quickly and has anti-corrosive properties. It has the particularity of being able to be used under all INTERNATIONAL antifouling or as an insulating layer over <span class="notranslate">non-INTERNATIONAL</span> antifouling.</div>
<div class="fiche-txt"></div>
<h2>Features of International Primocon Primer</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International's Interprotect primer</h2>
<div class="fiche-txt">This two-component epoxy primer is fast drying. It is very easy to apply. It offers excellent anti-corrosive protection. It can be used as a bonding coat on an epoxy primer. Be careful, it should not be applied on a single component product or on an antifouling.</div>
<div class="fiche-txt"></div>
<h2>Features of International's Interprotect primer</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International INTERPRIME 820 Epoxy Primer</h2>
<div class="fiche-txt">This epoxy primer is a two-component primer that will offer you high performance. This primer is applicable on steel and on aluminium. Moreover, you can use it on both emerged and immersed areas. It will allow an excellent anticorrosive protection.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of International INTERPRIME 820 epoxy primer</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The VC TAR 2 primary from International</h2>
<div class="fiche-txt">This primer will protect your polyester against osmosis and provide an excellent corrosion barrier for metal substrates. With this primer you will not need to sand between coats as it has a self-levelling formulation. It is ideal for antifouling.</div>
<div class="fiche-txt"></div>
<h2>Features of the International VC TAR 2 Primer</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>INTERPRIME 450 Epoxy Primer from International</h2>
<div class="fiche-txt">This primer is very waterproof and has an excellent anticorrosive power. It can be applied directly to steel and aluminium surfaces that have been previously prepared. It has a matt finish. It comes in a 17.5 L container.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of International INTERPRIME 450 epoxy primer</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Tie-Coat Epoxy Primer to be applied before antifouling</h2>
<div class="fiche-txt">Without tar, it is a bi-component. It is ideal as a bonding coat between the anticorrosive and the antifouling. You can also use it to get a nice finish.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt">
<div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
</div>
<div class="fiche-txt"></div>
<h2>Features of International Tie-Coat Epoxy Antifouling</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Fibreglass surface Prep from International</h2>
<div class="fiche-txt">This product allows you to eliminate the waxes of mouldings, which will avoid you to sand the gelcoat before applying another product. It can also be used to prepare alkyd paints. Ideal for submerged areas.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of the Fibreglass surface Prep by International</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The International Yacht Primer</h2>
<div class="fiche-txt">This conventional primer is a single component. It will be perfect for use in exposed areas. It is very fast drying and has anti-corrosive properties. It has pigments with aluminium particles and offers a real anti-corrosive barrier.</div>
<div class="fiche-txt"></div>
<h2>Features of the International Yacht Primer</h2>
</div>
unavailable
-
<div>
<h2>INTERFILL 830 epoxy coating from International</h2>
<div>This coating is the best possible choice for profiling steel or aluminium hulls and areas in the water or underwater. It is a two component, light grey colour. It is very hard and impact resistant. It is very easy to sand and will provide a good seal of the coated parts.</div>
<div></div>
<h2>Features of International INTERFILL 830 Epoxy Coating</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International Interfill 833 Coating</h2>
<div class="fiche-txt">This finishing coat is easily sanded. It is sold in a kit containing a base and a hardener. The hardener can be standard or fast. Interfill 833 will give you a very smooth finish after sanding. It can be applied with a spatula, a coating knife or a ruler.</div>
<div class="fiche-txt"></div>
<h2>Features of International Interfill 833</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International Epoxy Finishing Filler</h2>
<div class="fiche-txt">This coating is a two-component epoxy finishing coating. Very easy to apply, it is also easy to sand. You can use it on both emerged and immersed areas. It has a matt appearance.</div>
<div class="fiche-txt"></div>
<h2>Features of International Epoxy Finishing Filler</h2>
</div>
unavailable
-
<div>
<h2>International Interior Primer 860</h2>
<div>This epoxy primer is high performance. It has a low VOC content. It has been specially designed for interior use in all types of construction. Its drying time is fast, which will allow you a short application. It will provide excellent corrosion protection.</div>
<div></div>
<h2>International Interior Primer 860 Features</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Interior Finish 770 from International</h2>
<div class="fiche-txt">This product will be very useful for polyurethane finishes. It is a high quality bi-component for interiors. It has a uniform satin appearance. It is an excellent solution for ceilings, and any other areas where you do not want a glossy finish.</div>
<div class="fiche-txt"></div>
<h2>Features of the International Interior Finish 770</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Interior Finish 750 from International</h2>
<div class="fiche-txt">This product will allow you to make high quality polyurethane finishes in interior. Its finishes are very shiny and very opaque. Very easy to clean, it will offer you a very good resistance to chemical aggressions.</div>
<div class="fiche-txt"></div>
<h2>Features of the International Interior Finish 750</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The Epiglass Kit from International</h2>
<div class="fiche-txt">This product allows you to restore, repair and maintain your boat. This pack contains a resin and a hardener. The hardener is either fast or standard.</div>
<div class="fiche-txt"></div>
<h2>Features of the Epiglass Kit from International</h2>
</div>
unavailable
Showing 1-48 of 124 item(s)
• 
